The precise working of the machine can be dictated by the user, down to the smallest detail. However, the machines are programmed with a completely functioning jigging programme.

Unless given other instructions by the user, the machine will follow this programme. All you need to do is to select the “Depth” and “Jig”

The microprocessor incorporated within the BJ5000 enables the user to enter a practically unlimited number of possible combinations for fishing.
If more are required, these are available from Belitronic directly.
Mainline spools can be changed quickly by loosening a single screw.
Spare mainline spools are available, allowing spares filled with line to be kept in reserve in case of gear losses.

By quickly changing over to a spare mainline spool already filled with new line, lost fishing time can be minimised.

BJ 5000 Belitronic Jigging Machine

The standard mainline spool supplied with the machine will hold 1,000m of 1.20mm (approx 120lb) or 700m of 1.40mm (200lb) monofilament.

There are a number of accessories available for the BJ5000 ,including Line Holders, Stands, Outrigger Clamps, Outriggers, Extra Long Cables, Extra Large External Displays, External Sound Signals or Relay Functions.
(see Accessories below)

In relation to its pulling power, the BJ5000 uses remarkably little power.
This means that you can get many hours use for just a few amp-hours.

The BJ5000 can run off either 12 or 24v systems and electrically protected against overloading.

Each machine is also fitted with an Anti-Theft code facility,
so only those who know the code can use the machine.

The BJ5000 motor has more than enough power for any mackerel, squid or whitefish applications both here in Europe, and the
rest of the world.

The BJ5000 not only has a comprehensive list of features, but it is also the lightest machine on the market, despite being the toughest and
most robust. This is because of its aluminium and fibreglass reinforced Polyamide Plastic. The maximum weight of each machine is 11.8kg.

The BJ5000 is easy to locate, even in high positions.
The line can join the spool in any direction – left – right – up or down.
The machine in ambidextrous – meaning the stand holder can be positioned on the left or right of the machine.

The display is illuminated and easy to read from all angles.
The machine speaks in ENGLISH (or other selected language) and is supplied with full instructions also written in ENGLISH..

Each machine is covered by a 2 year guarantee. At each service each machine is updated with the latest programs available.
All the electronics are collected on circuit boards which can be simply and quickly changed in the case of malfunction.
It’s robust, but lightweight construction means it is simple and cost effective to exchange with Belitronic via the post.

TECHNICAL DATA		VARIABLES
Weight	11.8 kg	Step Length	1 - 100 metres, fathoms or feet
Power Consumption	12v 30 amp	Squid Interval	10 metres, fathoms or feet
	24v 15 amp	Sea-Bed Pause	0.5 to 10 seconds
	Average 3 - 4 amps	Step Pause	0.5 to 10 seconds
Variations in Power	12 to 30 volts	Bite Weight	1 - 25 kg
Cable Dimensions	5m ( 4 x 2.5mm special urethane )	Max Spool Speed	160 rpm
Line Capacity	1000 m of 1.2mm / 700m of 1.4mm	Brake	1 - 10 kg
Max Fishing Depth	999 metres, fathoms or feet
Speeds-manual catch/haul	50 - 160 rpm
Depth Measurement	almost 100% accurate
Catch Detector	Sound, Flashing Lights, and depth counter
PRICES

UNIT	ORDER CODE	PRICE £
Belitronic Jigging Machine	B 01	£ 1699.00 £ 1996.33 inc VAT)

Price INCLUDES Post & Packing to any destination within the UK, Highlands & Islands, & Ireland

BELITRONIC ACCESSORIES

We supply premium quality accessories for the BJ5000.
All are manufactured locally by professional fabricators to a very high standard, using 100% marine grade (316) stainless steel materials and fastenings.

A ) Mounting Pole Kit

To hold the BJ5000 securely in position on your boat, we supply a Mounting Pole Kit

This kit consists of the following 316 stainless steel parts...
1) A vertically pole , 38mm dia, 1m long
2) A foot plate, to secure the pole to the deck
3) A Clamp assembly to secure the vertical pole to the boat rail

The rail clamp enables the machine and outrigger arm to be swung out into the fishing position and swung back in again when not in use, and locked firmly in any position.
At the end of each day the vertical mounting pole is easily lifted from the rail clamp and foot with the BJ5000 still attached, for secure storage.
This mounting kit has been designed to be as strong and durable as possible.
We have taken chosen a design that will fit straight on to most vessels.
However on occasion, slight modifications may have to be carried out, depending upon the design and layout of the vessel in question.

B ) Outrigger Arm Kit

This consists of.......
1 ) Outrigger arm, 1 metre long, 25mm dia, pole in 316 stainless steel.
2 ) 316 stainless bolts to secure this pole horizontally to the Belitronic Machine.
3 ) 316 stainless eyebolt to hold the pulley block which comes with each machine.
This kit is required when fishing for whitefish or anything that is too big to be hauled aboard by the machine on its own

C ) Dyneema Braid

When fishing in deep or strong tidal waters keeping line diameter to a minimum is important to reduce drag and the amount of weight needed.
The vast majority of anglers fishing wrecks or deep waters these days use braided line for this reason.
Dyneema braid is incredibly strong and less than half the diameter of monofilament for the same stated strength.
Each spool holds 500m of 1.2mm Dyneema braid rated at 250lbs. Enough to fill a few machines.

ACCESSORY PRICES

UNIT	ORDER CODE	PRICE
Mounting Pole Kit	B 05	£ 124.95 (£146.82 inc VAT)
Outrigger Arm Kit	B 06	£ 49.95 (£58.69 inc VAT)
Combined Kit - Mounting Pole & Outrigger Arm	B 07	£ 149.50 (£175.66 inc VAT)
Dyneema Braid	B 08	£ 99.95 (£117.44 inc VAT)